GUIDE TO JAILBREAK IPOD TOUCH 2G Jailbreak
Saturday, January 31, 2009
Psoriasis On Babies Head
Here is the guide to jailbreak ipod touch 2g!
childbirth Dear readers by saying that this is the provisional version of the jailbreak, in fact every time you restart or switch on / off 's ipod, we must re-run the 3rd step of the program.
THIS GUIDE AND THE PROGRAM MAY BE DISCLOSED, PROVIDED THAT THERE IS A LINK TO THIS BLOG ... Have given you the jailbreak, NOT ASK MUCH!
Update!
arrived Simple IPT2G JBn0w 1.0-the program that all started, but with something extra.
The new version of my program completely automates all steps, except the entrance to the terminal in DFU, but they do not need to kill the services and processes (He thinks the program) or disconnect and reconnect ' ipod (there always thinks the program), and of course even more to enter commands by hand (as happened in the very first version).
The program is very light, in fact just one click and without having the expected and puts the RAM, this Asthe totally devoid of graphics, but the wizard same way as the touch of numbers to select the option you want (for example, open the program by pressing 3 and sending the menu that appears, and within seconds our connected iPod in DFU will start without having to think of any prog or killaggio services!) NATURALLY functionality is guaranteed 90% ON THE PC WITH WINDOWS OPERATING SYSTEM.
To download the new version used these mirrors:
Mirror 1 or
or Mirror 2 still
Now we come to us.
This jailbreak is still stable and running, and the procedure in any case will not do any brick risk, even if it is wrong (but it is better not to make mistakes right?)
however the program is designed in 3 steps so you can start over from step which has not been successful without damage and without having to start all over.
to restore everything as before but just put the ipod in DFU and restore the iTunes firmware to adjust ... and nobody (not even care) will see that you did a jailbreak.
Let's start with the guide.
The program will use "luxtouch0.1"
is based on the first program that was created just for me "IronGiu" (a procedure which is then tested and safe), with a personal set of patches, in order to boot the iPod after jailbrakato (in fact the contrary the procedure for Mac, I created a patch for LLB and a payload instead dell'iboot for iBoot).
We thank the member of our team Luciano Ferraro (lux) (which is also the creator of Gmangas1-2: http:// gmangas.itascan.info /
, software to read manga online advice to fans to drop by) wizard to create the interface so as to make it easier to process, and for integrated iRecovery-b, which speeds up the boot without having to disconnect and reconnect the ipod last procedure.
Now we start the program "luxtouch0.1" and expect to open.
Create Firmware
Now, first of all we will create a custom firmware, then from screen that appears, select the original 2.2.1 firmware and then select the folder where you want it to be created firmware cracked and cydia installed.
Now we press ahead and expect the firmware is created, remember that it takes at least 3 gb of free space in c, and several minutes depending on the speed of the pc to finish the process.
At the end of the process the program will warn you and advise you to check if you created the file "itouch_2.2.1.JB" (or the name you have chosen you to the file ), if you created go to step 2.
Start
Jailbreak
Jailbreak
At this stage, we will prepare our ipod to get the cracked firmware and cydia installed, to do this
luxtouch re-opening the program, the first screen, select Start Jailbreak.
open soon tell us to close all the processes related to ipod touch, try to close them all to avoid having to close iTunes every time and to avoid unnecessary interference. now asks us if our terminal is in DFU, and explains the procedure, I will summarize the illustrated here:
with the iPod connected to your computer by simultaneously pressing the "home" and button on / off "for ten seconds ->
is very important to keep to 10 seconds of the home + sleep! at the end of 10 seconds, then release button on / off "but we continue to hold the" home! "
continue to press the home button (it only takes about fifteen seconds usually) expect your PC to detect the new hardware and / or you hear the sound of a connected device, but if the screen is still black, we are actually in DFU! ! WELL DONE. At this point we press forward, attiandiamo that loads and then tell us to disconnect and reconnect after 10 seconds the ipod.
Binaca If the screen goes, everything goes well, then premiamoAvanti!
(Otherwise, if a problem installing the libusb, Let 's go to solve ...
To work around this problem:
- If you are having people do this, enter the property 'file' luxtouch "and run it in mode 'compatibility' with XP sp2 Here download and install this update.)
If all goes well, we press forward, the program will load , insert commands, and then we advise you to open iTunes to put in a firmware cracked we have created.
Open iTunes, and tell us who else is logged on an ipod in recovery mode, if it opens all posts Click Cancel to bring to the screen where else is the name of the iPod and so on ...
In iTunes, hold down the shift key on the keyboard
, click on "Restore" (and then release the shift key of course) ->
At this point opens a screen to select the restore file ->
If the procedure ends with success, the iPod reboots, it will remain black and the computer will say "USB Device Not Recognized" This is a very good sign.
Start
At this point, the jailbreak is complete and the Notre ipod started with the design of USB and iTunes, open iTunes, let it sync, then you will see the IPOC with cydia installed!
At this point opens a screen to select the restore file -> 
select the file "itouch_2.2.1.JB" (or the name you choose when you create) that we previously created and click Open ... and expect that the procedure ends.
If the procedure ends with success, the iPod reboots, it will remain black and the computer will say "USB Device Not Recognized" This is a very good sign. boot
The 3rd and last step, let's start making our ipod that is "not recognized", then we start the program again "luxtouch0.1, close itunes and all processes, and follow the signs that will give us the program ... then replace the device in DFU (to put it back in DFU has a black screen even though it is very important to keep to 10 seconds of the "standby + home" then release "standby"
but continue pressing the "home" until we feel the suno of USB!)
, following the procedure as above, and click Next! We will see the screen goes blank,
to load this file, run my personal set of patches, and launch iPod! , following the procedure as above, and click Next! We will see the screen goes blank,
At this point, the jailbreak is complete and the Notre ipod started with the design of USB and iTunes, open iTunes, let it sync, then you will see the IPOC with cydia installed!
I have to sync with iTunes the first time only because it has a firmware "virgin" uccessivamente just run the third step and start normally.
every time you reboot / turn off, or because of a restore from backup and restart is seen as "unknown device" we just need to reapply the 3rd step! ie "Start Boot", MEMORY for the millionth time you repeat step 3 is not lost any data! DO NOT LOSE THE JAILBREAK, erase APPLICATIONS! SIMPLY THE 3 POINT IS THAT OTHERWISE DISTRIBUTE THE IPOD WILL NOT START! POINT WHERE ALL AGAIN AND ALL APP and jailbreak, MUSIC PHOTOS ETC, are always there!
I greet you and assure you that you restore everything as before if you want ... I've made to test the procedure more than once ... I went back to the original 2.2.1 without problems ... just put in DFU as seen before, and u press reset iTunes. Updated:
As always remember, to support us, or just a
For all applications go, you need to restore the backup from iTunes, wait for it to restart and re-eeguire Section 3 of this guide to get it to start, a start vlta click sync and charge all the applications you had before! From then on, everything will work!
I greet you and assure you that you restore everything as before if you want ... I've made to test the procedure more than once ... I went back to the original 2.2.1 without problems ... just put in DFU as seen before, and u press reset iTunes.
I WOULD LIKE TO THANK ALL THOSE WHO HAVE WORKED ON THIS PROJECT BY OFFERING THEIR SUPPORT AND SUPPORT TEST IN VARIOUS TYPES OF RESEARCH IN ETC ... I therefore thank Luca, Man, DarkSin, Simonepsp, `lux, Vaio and I apologize if I forgot someone ... but they are always 4: P add me who will report it and if he sees fit, of course: P
I thank you and greet you ... recalled, were the first Italian to make a program ALMOST: P simple and above for Windows, with a personal set of patches to start! otherwise aivoglia to try the procedure for mac ... it would never work because the problem was solved in the LLB and the PwnageTool, windows did not do it: P
As always remember, to support us, or just a
DONATION to what you prefer using the donation button on the right, or
CLICK ON THE BANNER OR THE SECURITIES WHICH ARE UNDER THE DONATION BUTTON ON THE RIGHT! O ONE MORE THEN ONE CLICK SEARCH BY USING "Custom Search" UP ON THIS BLOG!
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment